One Basic Bicycle Tune-up - manual and electric Bikes

Safety Check:

Inspect the frame and fork for cracks or damage.

Check for loose or damaged bolts and fasteners.

Examine the tires for signs of wear, damage, or foreign objects.

Ensure the brakes and shifting systems are functioning properly.

Cleaning:

Thoroughly clean the entire bike, including the frame, drivetrain, and wheels.

Degrease and clean the chain, cassette, and chainrings.

Clean and inspect the brake pads and rims.

Wheel Inspection and Truing:

Check for loose spokes and tighten them as needed.

True the wheels to ensure they run straight and round.

Check and adjust hub bearings for smooth operation.

Drivetrain Maintenance:

Lubricate the chain with a quality bicycle chain lubricant.

Check the condition of the chain, cassette, and chainrings for wear.

Inspect and adjust front and rear derailleurs for smooth shifting.

Brake Service:

Adjust brake cable tension.

Inspect brake pads for wear and replace them if necessary.

Ensure brakes are aligned and functioning correctly.

Check and adjust brake lever reach if needed.

Tire and Tube Inspection:

Inspect tires for wear, cuts, or punctures.

Ensure tires are properly inflated to the recommended pressure.

Replace inner tubes or tubeless sealant as needed.

Test Ride:

Take the bike for a short test ride to ensure all adjustments are working correctly.

Test brakes, shifting, and overall ride quality.

Final Check:

Verify that all adjustments are properly set and secure.

Double-check all safety-related components.